Neutrik NAC3FCB Powercon (grey) (7902)

Neutrik NAC3FCB Powercon (grey) (7902)

11,68 

Saatavuus: TILAUSTUOTE: Saatavuus toimittajalta 10-14 päivää Tuotetunnus (SKU): NAC3FCB Osasto:
Kysy tästä tuotteesta

Kuvaus

Cable connector, quick lock with securing lever, B-type for power-out, screw terminals.

The PowerCon® is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The PowerCon® is a connector without breaking capacity, i.e. the PowerCon® should not be connected or disconnected under load or live!




Features & Benefits
  • Locking 20 A / 250 V ac appliance coupler
  • 3 contacts for line, neutral and premating safety ground
  • power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
  • Fast and easy twist lock latching system
  • Extremely robust and reliable
  • Ergonomic design
  • User friendly latch design for easy handling
  • Unique Neutrik chuck type strain relief
  • UL, cUL recognized components
    VDE certified
    SEV approved
  • Branded with unique hologram – guarantees genuine and authentic Neutrik product

Product
  • Connector Type PowerCon
  • Gender female

Electrical
  • Contact resistance ≤ 3 mΩ
  • Dielectric strength 4 kVdc
  • Insulation resistance > 0.1 GΩ (after damp heat test IEC 68-2-30)
  • Rated current per contact 20 A
  • Rated voltage 250 V

Mechanical
  • Cable O.D. 5 – 15 mm
  • Lifetime > 1000 mating cycles
  • Wire size 2,5 mm²
  • Wire size 14 AWG
  • Wiring screw type terminals or soldering
  • Locking device Quick Lock

Material
  • Bushing Polyamide (PA 6 15% GR)
  • Contact plating 4 µm Ag
  • Contacts Bronze (CuSn6)
  • Insert Polyamide (PA 6 30 % GR)
  • Locking element Zinc diecast (ZnAl4Cu1)
  • Shell Polyamide (PA 6 30 % GR)
  • Strain relief Polyacetal (POM)

Environmental
  • Approvals UL,VDE,Electroswiss
  • Flammability UL 94 HB
  • Protection class IP 20 (mated)
  • Savety requirements EN/IEC 61984
  • Solderability Complies with IEC 68-2-20
  • Temperature range -30 °C to +80 °C

Mobile Cables
  • Coding A-type for power outlet (color coding grey)

Technical Data

Electrical

Rated current: 20 A rms @ wire size 2.5 mm²
Rated voltage: 250 V ac
Dielectric strength: 4240 V pp
Contact resistance: = 3 m after 5000 insertion-withdrawal operations
Insulation resistance – initial: > 2 G
– after damp heat test: > 500 M
Creepage distance: according to IEC 664-1
Safety ground: Premating

Mechanical

Retention method: Quicklock with securing lever
Cable anchoring: NEUTRIK® chuck principle
Cable O.D. range: 5 – 15 mm
Cable retention force: = 220 N, depending on cable dia and material

Materials

Housing: PA 6 30% GR
Insert (FC part): PBTP 20% GR
Contacts: ZnAI4Cu1 / CuSn8 4 µm / 20 µm Ag plated
Securing lever: ZnAI4Cu1, CuNi plated
Bushing: PA 6 15% GR
Chuck: POM
Temperature range: -30°C to +80°C

Coding

  • With the two non-interchangeable types of connectors (A-type, B-type) it is impossible to produce a short circuit.
  • Mating connectors (combination) are identified by mechanical keyways and by color:
  • A-type (POWER INLET)
  • B-type (POWER OUTLET)
  • Cable connector: blue grey, with blue bushing
  • Chassis connector: blue grey

Wiring:

  • Cable: screw-type terminals (use with supplied ferrules for stands) or soldering Nom. wire size/contact: 2.5 mm² / 14 AWG
  • Chassis: flat tabs for FASTON 0.187 x 0.02 (4.8mm x 0.5mm) or soldering

    You've just added this product to the cart: