- Kuvaus
- Lisätiedot
- Brand
Kuvaus
Air tight chassis connector, A-type for power-in, flat tab terminals.
The PowerCon® is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The PowerCon® is a connector without breaking capacity, i.e. the PowerCon® should not be connected or disconnected under load or live!
Features & Benefits
- Lockable 3-pole equipment (AC) connector with contacts for line, neutral and pre-mating safety ground.
- High current capacity, rated at 20A / 250V ac
- Fast and easy locking system
- Extremely robust and reliable
- Excellent cable retention
- UL, C-UL recognized components
- VDE and SEV approved
Product
- Connector Type PowerCon
- Gender male
Electrical
- Contact resistance ≤ 3 mΩ
- Dielectric strength 4 kVdc
- Insulation resistance > 0.1 GΩ (after damp heat test IEC 68-2-30)
- Rated current per contact 20 A
- Rated voltage 250 V
Mechanical
- Lifetime > 1000 mating cycles
- Wiring flat tabs for 3/16 (FASTON® 4.8 x 0.5 mm) or soldering
- Locking device Quick Lock
- Mounting direction front
- Chassis shape D
Material
- Contact plating 20 µm Ag
- Contacts Brass (CuZn39Pb3)
- Locking element Steel Ck67
- Shell Polyamide (PA 6 30 % GR)
Environmental
- Approvals UL,VDE,Electroswiss
- Flammability UL 94 HB
- Protection class IP 20 (mated)
- Savety requirements EN/IEC 61984
- Solderability Complies with IEC 68-2-20
- Temperature range -30 °C to +80 °C
Mobile Cables
- Coding A-type for power inlet (color coding blue)
Technical Data
Electrical
Rated current: | 20 A rms @ wire size 2.5 mm² |
Rated voltage: | 250 V ac |
Dielectric strength: | 4240 V pp |
Contact resistance: | = 3 m after 5000 insertion-withdrawal operations |
Insulation resistance – initial: | > 2 G |
– after damp heat test: | > 500 M |
Creepage distance: | according to IEC 664-1 |
Safety ground: | Premating |
Mechanical
Retention method: | Quicklock with securing lever |
Cable anchoring: | NEUTRIK® chuck principle |
Cable O.D. range: | 5 – 15 mm |
Cable retention force: | = 220 N, depending on cable dia and material |
Materials
Housing: | PA 6 30% GR |
Insert (FC part): | PBTP 20% GR |
Contacts: | ZnAI4Cu1 / CuSn8 4 µm / 20 µm Ag plated |
Securing lever: | ZnAI4Cu1, CuNi plated |
Bushing: | PA 6 15% GR |
Chuck: | POM |
Temperature range: | -30°C to +80°C |
Wiring:
- Cable: screw-type terminals (use with supplied ferrules for stands) or soldering Nom. wire size/contact: 2.5 mm² / 14 AWG
- Chassis: flat tabs for FASTON 0.187 x 0.02 (4.8mm x 0.5mm) or soldering
Lisätiedot
Paino | 0,0122 kg (kilogramma) |
---|