- Kuvaus
- Brand
Kuvaus
The industry standard XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.
3 pole male cable connector with Nickel housing and silver contacts.
Features & Benefits
- Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
Product
- Connector Type XLR
- Gender male
Electrical
- Capacitance between contacts ≤ 4 pF
- Contact resistance ≤ 3 mΩ
- Dielectric strength 1,5 kVdc
- Insulation resistance > 2 GΩ (initial)
- Insulation resistance > 1 GΩ (after damp heat test)
- Rated current per contact 16 A
- Rated voltage 50 V
Mechanical
- Cable O.D. 3.5 – 8.0 mm
- Insertion force ≤ 20 N
- Withdrawal force ≤ 20 N
- Lifetime > 1000 mating cycles
- Wire size max. 2.5 mm²
- Wire size max. 14 AWG
- Wiring Solder contacts
- Locking device latch lock
Material
- Boot Polyuretan
- Bushing Polyamide (PA 6 15% GR)
- Contact plating 2 µm Ag
- Contacts Brass (CuZn39Pb3)
- Insert Polyamide (PA 6.6 30 % GR)
- Locking element Zinc diecast (ZnAl4Cu1)
- Shell Zinc diecast (ZnAl4Cu1)
- Shell plating Nickel
- Strain relief Polyacetal (POM)
Environmental
- Approvals UL
- Flammability UL 94 HB
- Standard compliance IEC 61076-2-103
- Protection class IP 40
- Solderability Complies with IEC 68-2-20
- Temperature range -30 °C to +80 °C
Technical Data
Electrical
Number of contacts: | 3 – 7 | ||||||
Contact resistance: | = 3 m | ||||||
Insulation resistance initial: | > 2 G | ||||||
Insulation resistance after damp heat test: | > 1 G | ||||||
Dielectric strength: | 1500 V dc | ||||||
Rated current: |
|
Mechanical
Lifetime: | >1000 cycles |
Insertion / withdrawal force: | = 20 N |
Cable O.D. range: | 3.5 mm – 8.0 mm (except RC Series) |
Materials
Shell: | ZnAI4Cu1, gal Ni or black Cr over Cu plating | ||||
Insert: | PA 6.6 30% GR (glass reinforced) | ||||
Contacts: |
| ||||
Contact surface: | gal 2 µm Ag or gal 0.2 µm Au hard alloy over 2 µm Ni | ||||
Latch lock: | St3K32 (latch) / CK 67 (spring) | ||||
Strain-relief clamp: | POM | ||||
Antikink bushing: | PUR |
Environmental
Temperature range: | -30° C to + 80° C |
Flammability: | UL 94HB |
Solderability: | complies with IEC 68-2-20 |